brc test rtt

brc test rtt

Measure the round-trip time for a terminal

Synopsis

This command runs a two-way ping test to measure the round-trip time for a network bi-directionally. All the regular flags for ping can be passed after the-- separator.

The special value gateway can be used as the target IP address to use the gateway IP address of the UPF where the terminal is connected. This gateway IP is assumed to be the first IP address in the subnet of the terminal.

The option --namespace by default points to a Kubernetes namespace of the default Kubernetes context. You may explicitly provide the context in the format of <context-name>.<namespace> to access the cluster using particular kubectlcontext. The format bare.<machine-name> is reserved for bare-metal machine access where SSH is used to access the machine named <machine-name>. In this case the <terminal> points to the name of the network interface where the ping test is being executed.

• Since this command calls ping not ping6, it is assumed that the target IP address is an IPv4 address.

brc test rtt [flags]

Examples

# rtt test for ue1 on the cluster to the gateway for 5 packets
brc test rtt ue1 gateway -- -c 5

# rtt test for ue2 on the cluster to 8.8.8.8
brc test rtt ue2 8.8.8.8

# rtt test for bare-metal machine named ayo on the interface wwan0 to the gateway
brc test rtt --namespace bare.ayo wwan0 gateway

Options

  -h, --help   help for rtt

Options inherited from parent commands

  -n, --namespace string   namespace to perform the operations (default "trirematics")
  -p, --plot               Specify if the results should be plotted.
  -v, --verbose            debug output

SEE ALSO

• brc test - Perform a test to evaluate the network performance

Auto generated by spf13/cobra on 23-Apr-2025